A look at the Arduino Nano 33 IoT
The Nano33 IoT is a small board which has WiFi and Bluetooth connectivity that combined with its low power architecture makes it a practical and cost-effective solution for your connected…
The Nano33 IoT is a small board which has WiFi and Bluetooth connectivity that combined with its low power architecture makes it a practical and cost-effective solution for your connected…
This is a 8X24 LED dot matrix display module that can be used to display characters and graphics and it is simple to control it. Each dot matrix is controlled…
In this article we look at a GPS Shield which is based on the ublox’s NEO-6M receiver module. Lets look at some info about the NEO‑6 module. The NEO‑6 module…
Another shield that I recommend for beginners is the Easy module shield, you can see it in the images below. It is very similar to the open smart rich shield…
The OPEN-SMART Rich UNO R3 is an ATMEGA328P development board with many components on board and also has the ability to connect an existing Arduino shield to it, it is…
The first shield we will look at is the OPEN-SMART Rich Shield, this is a very useful shield which is ideal for beginners wishing to learn about the Arduino. Lets…
This Rich Shield for the Arduino has many useful components onboard such as LED’s, buttons and a buzzer. It is easy and great for learning arduino development and programming This…
In this example we connect an Ethernet shield to an Arduino, we then connect a GY-21P sensor to this and we will display the readings on a webpage The GY-21P…
In this example we connect an Ethernet shield to an Arduino, we then connect a MPL3115A2 sensor to this and we will display the readings on a webpage Lets take a…
In this article we take a look at the Neopixel shield, as you have probably guessed this is an Arduino shield which is basically 5 rows of 8 Neopixel RGB…