HCT1008 sensor and LCD example for Arduino

In this example we will show the temperature and humidity readings from a HDC100x series sensor and display this on a 16×2 LCD.

First lets take a look at the sensor

The HDC1000 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The device measures humidity based on a novel capacitive sensor. The humidity and temperature sensors are factory calibrated.

The sensing element of the HDC1000 is placed on the bottom part of the device, which makes the HDC1000 more robust against dirt, dust, and other environmental contaminants. The HDC1000 is functional within the full –40°C to +125°C temperature range.

Parts

1 x Arduino Uno
1 x LCD Keypad shield
1 x HDC1008 breakout
Dupont hookup cable x 4

Code

The good folks at Adafruit have done the hard work and produced a library for this device – https://github.com/adafruit/Adafruit_HDC1000_Library  . If you are using Arduino IDE 1.6.5 or later you can easily import this library by going to Sketch -> Include Library -> Manage Libraries

[codesyntax lang=”cpp”]

#include <Wire.h>
#include "Adafruit_HDC1000.h"
#include <LiquidCrystal.h>

//setup for the LCD keypad shield
LiquidCrystal lcd(8, 9, 4, 5, 6, 7);

// Connect Vin to 5VDC
// Connect GND to ground
// Connect SCL to A5 on UNO
// Connect SDA to A4 on UNO

Adafruit_HDC1000 hdc = Adafruit_HDC1000();

void setup() 
{
  Serial.begin(9600);
  Serial.println("HDC100x test");
  //lcd setup
  lcd.begin(16,2);
  lcd.setCursor(0,0);
  lcd.print("Temp: ");
  //line 2 - humidity
  lcd.setCursor(0,1);
  lcd.print("Humidity: ");
  if (!hdc.begin()) 
  {
    Serial.println("Couldn't find sensor!");
    while (1);
  }
}


void loop() 
{
  Serial.print("Temp: "); Serial.print(hdc.readTemperature());
  Serial.print("\t\tHum: "); Serial.println(hdc.readHumidity());
  lcd.setCursor(7,0);
  lcd.print(hdc.readTemperature());
  lcd.setCursor(11,1);
  lcd.print(hdc.readHumidity());
  delay(500);
}

[/codesyntax]

 

Links

 

Adafruit HDC1008 Temperature & Humidity Sensor Breakout Board
1602 LCD Keypad Shield for Arduino