Intel Galileo 2 and Arduino IDE
A while back I bought an Intel Galileo 2 and recently noticed that in the Arduino IDE 1.6.5 via the boards manager that the board was supported. Rather than go…
A while back I bought an Intel Galileo 2 and recently noticed that in the Arduino IDE 1.6.5 via the boards manager that the board was supported. Rather than go…
The BMP180 is a new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smart phones, tablet PCs…
The SHT21 has a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then…
In this example we connect an RGB led to our MSP-EXP430G2 launchpad and flash the red, green and blue colours Schematic I actually had an RGB breakout attached the the…
This is a basic ‘hello world’ example for the MSP430G2 LaunchPad, this example uses the Energia development environment. For people who have used the Arduino development environment you will recognize the…
The MQ-2 is a fairly low cost sensor that can detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke. There are a wide variety of shields and modules that can be bought…
Another feature of the Arduino Esplora is a built in RGB LED, again its fairly simple to use this using the writeRGB function. You can see the RGB led in…
This example will read the temperature using the built in temperature sensor on the Arduino Esplora and display it on the LCD Code [codesyntax lang=”cpp”] #include <Esplora.h> #include <TFT.h>…
Recently I had problems getting my Arduino and ethernet shield working correctly, I found the following code which basically reports via the serial monitor whether the SD card is available…
I had one of the Rainbowduino/ColorDuino type shields in my box of parts, so I decided to throw up a quick example. The Rainbowduino can be use to drive 8×8…