In this example we will connect a BME280 sensor to an Arduino and display the output on an 128×32 I2C OLED display The BME280 is a humidity sensor features an extremely …
-
-
The AM2301 is a wired version of the DHT21, in a large plastic body. Specifications: Type: AM2301 Accuracy resolution: 0.1 Measurement range: 0-100%RH Temperature measurement range: -40℃ ~ +80℃ Humidity …
-
MCP4725 is a single channel, 12-bit, voltage output Digital-to-Analog Converter with integrated EEPROM and an I2C Compatible Serial Interface. Features 12-Bit Resolution On-Board Non-Volatile Memory (EEPROM) ±0.2 LSB DNL (typ) …
-
In this example we will connect a HDC1000 sensor to a data logging shield and log out the temperature and humidity to a csv file on an SD card Here is …
-
This is a simple data logging shield which will enable you to add SDCard storage support and RTC capability to your Arduino project. Here is a picture of the shield. …
-
WS2812 family is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. It internal include intelligent digital port …
-
This was another example of driving an 8×8 LED matrix , this time we decided to use Johnny-five (http://johnny-five.io/) , we were having a play about with Javascript. The process …
-
In this example we will show the temperature and humidity readings from a HDC100x series sensor and display this on a 16×2 LCD. First lets take a look at the …
-
In this example we will program an Attiny44 using an Arduino The first step is to take a look at the pinouts and features available if you decide to use …
-
In this part we will now try and program an Attiny85 microcontroller using an Arduino, the process is similar to our Attiny2313 example. Basically slightly different connections and change the …